Sony 2 Water Dispenser User Manual


 
Chapter 16 Engineering Setup
284
Setup Relating to Router Interface and Tally
4
When you selected Tally Input as the tally generation mode in step 3,
select any of the following in the <Tally Input> group.
DCU1: Generate tally with reference to signal input to DCU1 port. Set the
port number with the knob.
DCU2: Generate tally with reference to signal input to DCU2 port. Set the
port number with the knob.
5
Turn the knob to select the tally input port number.
6
Press [Execute].
This sets the settings made in steps 2 to 5 as the settings for tally
generation.
Modifying tally generation
Use the following procedure.
1
In the Router/Tally>Tally Enable menu, press [Modify].
The Modify menu appears.
2
With reference to steps 2 to 5 in the preceding section “Making new tally
generation settings,” change the parameters as required.
3
Press [Execute].
This modifies the tally generation settings.
Deleting tally generation settings
Use the following procedure.
1
Using either of the following methods in the Router/Tally Enable menu,
select the tally generation entry you want to delete.
Press directly on the list appearing in the status area.
Press the arrow keys to scroll the reverse video cursor.
2
Press [Delete].
This deletes the selected tally generation entry.
Knob Parameter Adjustment Setting values
5 Input No Tally input port number 1 to 102