Filter
Top Products
Chapter 18 Macros
314
Macro Operations in the Numeric Keypad Control Block
4
Repeat step 3 to add the desired events to the macro.
5
In the numeric keypad control block, press the [MCRO] button, turning it
red.
6
Press the [STORE] button.
This completes macro editing, and the [MCRO] and [STORE] buttons in
the numeric keypad control block light amber. The keyframe control block
returns to the state before macro editing began.
7
Save the macro in the numeric keypad control block.
For details of the method of operation, see “Saving a Macro” (page 314).
Inserting a pause event
Use the following procedure.
1
In the keyframe control block, press the [PAUSE] button, lighting it green.
The numeric keypad control block display shows “PAUSE.”
2
With the buttons in the numeric keypad control block, enter the length of
the pause (1 to 999 frames).
3
Press the [ENTER] button.
This sets the pause length, and inserts the pause event.
Saving a Macro
To save a macro you have created or edited, use the following procedure.
1
In the numeric keypad control block, press the [MCRO] button, turning it
on.
This assigns the numeric keypad control block to macro operations.
2
Press the [STORE] button, turning it on.
3
Enter the number of the register in which you want to save the macro with
the numeric keypad buttons.
To search for an empty register, instead of entering a number, press the [.]
(period) button.