Filter
Top Products
Chapter 16 Engineering Setup
244
Setup Relating to Switcher Processor
a) Adjustable for Box2
5
When in step 3 you selected [Box1] or [Box2], in the <Box1 Adjust> or
<Box2 Adjust> group, select the aspect ratio (16:9/14:9/4:3).
Setting the reference output
To adjust the reference output phase with respect to the reference input, adjust
the following parameters in the Switcher>Output menu.
Settings Relating to Video Switching (Transition Menu)
For settings relating to video switching, use the Switcher>Transition menu.
To display the Transition menu
In the Engineering Setup menu, select VF3 ‘Switcher’ and HF4 ‘Transition.’
The status area shows the transition preview, key transition, bus toggle, and
split fader settings for each M/E and P/P bank.
Selecting the bank to which the settings apply
In the Transition menu, using any of the following methods, select the bank to
which the settings apply, then make the settings.
• Press directly on the list appearing in the status area.
• Press the arrow keys to scroll the reverse video cursor.
• Turn the knob to make the selection.
The selected bank appears in reverse video.
Setting the transition preview mode
To select the transition preview mode, in the <Transition Preview> group of
the Transition menu, select any of the following.
One Time: The transition preview ends after a single transition.
Normal: Switching the [TRANS PVW] button on or off switches between the
transition preview mode and the normal mode.
Knob Parameter Adjustment Setting values
2 Line Line phase −90 to +90
3 Time Time −32.00 to +96.00
Knob Parameter Adjustment Setting values
1 Bank M/E or P/P selection to which settings apply 1 to 4