Filter
Top Products
169Snapshot Operations in the Flexi Pad Control Block
Chapter 14 Snapshots
Deleting a snapshot from a Flexi Pad control block
As an example, to delete a snapshot on the M/E-1 bank, use the following
procedure.
1
In the M/E-1 bank Flexi Pad control block, press the [SNAPSHOT] button.
This allocates the Flexi Pad control block to snapshot operations. The
numeric display shows the last selected bank number and the last recalled
register number on the corresponding switcher bank.
2
Select the bank for the register containing the snapshot you want to delete.
See step 3 (page 166) in “Saving a snapshot with the Flexi Pad control
block.”
3
Hold down the [STORE STATS] button, then hold down the button in the
memory recall section displaying the number of the corresponding
register.
The button you pressed goes off, and this deletes the snapshot. The
[STORE STATS] button lights amber.
Note
On a simple type Flexi Pad control block, it is not possible to delete a snapshot.