Filter
Top Products
Chapter 18 Macros
322
Macro Attachment Assigning
Macro Attachment Assigning
The term “macro attachment” refers to the assignment of a macro register to a
control panel button, so that the macro execution is linked to the normal
function of the button.
For an overview of macro attachment, see “Macros” in Chapter 1 (Volume 1).
Setting and Canceling a Macro Attachment
Setting a macro attachment
Use the following procedure.
Note
The buttons for which a macro attachment can be set are the background A and
background B rows of buttons only, in the cross-point control block of the M/
E banks and PGM/PST bank.
1
Recall the macro register you want to assign to the button.
For details of recall from the numeric keypad control block, see page 311.
For details of recall from the Flexi Pad control block, see page 317.
2
To set in pre macro mode, hold down the [PRE MCRO] button in the cross-
point control block, and to set in post macro mode, hold down the [POST
MCRO] button, and then press the desired button in the background A or
B row.