Filter
Top Products
41DME Special Effect Operations
Chapter 11 DME Operations
To stop the waves
Press [Lock], turning it on.
With each press, the waves alternately stop and start moving again.
To select the waveform
Press [Form] and set the following parameters.
• When H&V mode is selected
• When Size mode is selected
a) 1 (SINE): Sine wave
2 (PARABOLA): Parabola wave
3 (TRIANGLE): Triangular wave
4 (RECTANGLE): Rectangular wave
5 (CIRCLE): Circular wave
6 (CUBIC): Cubic wave
To randomize the modulated waveform
Use the following procedure.
1
Press [Random], turning it on.
2
Set the following parameters.
• When H&V mode is selected
Knob Parameter Adjustment Setting values
1 Form H Waveform in horizontal direction
1 to 6
a)
2 Form V Waveform in vertical direction
1 to 6
a)
Knob Parameter Adjustment Setting values
1 Form H Waveform
1 to 6
a)
Offset
Amp