Filter
Top Products
219Setup Relating to Operations From the Control Panel
Chapter 16 Engineering Setup
3
Depending on the selection in step 2, make the following settings.
When Menu Shortcut is selected: For the subsequent operations, see the
next item “Assigning a menu shortcut to a user preference button”
(page 219).
When Utility Command is selected: A list of commands appears on the
right of the status area; using any of the following methods, select the
command you want to assign.
• Press directly on the list.
• Press the arrow keys to scroll the reverse video cursor.
• Turn the knob to make the selection.
When Shotbox Recall is selected: Turn the knob to select the shotbox
register you want to assign.
4
Press [Action Set].
This assigns the selected action, which is reflected in the status area.
To cancel an assignment
After selecting the relevant button, press [Clear].
Assigning a menu shortcut to a user preference button
Use the following procedure.
1
Referring to the procedure up to step 2 in the previous item, select [Menu
Shortcut].
The user preference buttons [PREFS 1] to [PREFS 8] flash amber.
2
Using any of the following methods, display the menu to which you want
to make a shortcut.
• In the menu control block, press the relevant top menu selection button,
then select VF and HF.
• Press the menu page number button in the upper left corner of the menu
screen, then enter a menu number from the numeric keypad window.
• Press a particular control panel button twice in rapid succession.
Knob Parameter Adjustment Setting values
3 Command Utility command selection 1 ...
Knob Parameter Adjustment Setting values
3 Shotbox Shotbox register selection 1 to 99