Filter
Top Products
Chapter 11 DME Operations
66
DME Special Effect Operations
Setting the bar shape of the highlight area
When you select [Bar] or [Preset] in step 2, use the following procedure to set
the shape of the bar.
1
Turn [Light Modify] on.
2
Adjust the following parameters.
a) There are some nonlinear effects for which Angle cannot be used.
Bar shape parameters
Setting the color of the light in the highlight area
To set the color of the light in the highlight area, use the following procedure.
1
Turn [Light Color] on.
Knob Parameter Adjustment Setting values
1 X X-value of bar center point
−16.00 to +16.00
2 Y Y-value of bar center point
−9.00 to +9.00
3
Angle
a)
Angle of bar
−8.00 to +8.00
4 Width Width of bar 0.00 to 100.00
5 Soft Softness of edges 0.00 to 100.00
Center point of bar
Bar width
Bar angle