Filter
Top Products
Chapter 13 Keyframe Effects
152
Register Operations in the Menus
2
Press the region display in the upper part of the list to display a selection
window, then select the region in the selection window. Selecting multiple
regions is also possible.
3
Press [OK].
The selected region name appears in the upper part of the list.
4
Using either of the following methods, select the register.
• Press directly on the list in the status area.
• Press the arrow keys to scroll the reverse video cursor.
• Turn the knobs to make the setting.
• To select all registers, press [All].
5
Press [Lock], write-protecting the register.
Copying, moving, and swapping effect register data
This section describes the procedure for copying. You can move or swap
registers using a similar procedure.
1
In the Effect menu, press VF2 ‘Effect’ and HF3 ‘Copy/Merge.’
• The Copy/Merge menu appears.
• The left side of the status area shows the register number of the copy
source, and the right side shows the register number of the copy
destination.
2
Press the region display in the upper part of the list to display a selection
window, then select the region in the selection window. Selecting multiple
regions is also possible.
Operation between regions
Operation between regions is possible in the following cases.
• Two of the M/E-1, M/E-2, M/E-3 and P/P regions
• Two of the USER1 to 8 regions of the same configuration
• Two of the DME1 to 4 (including Global) regions
3
Press [OK].
The selected region name appears in the upper part of the list.
Knob Parameter Adjustment Setting values
1 Register Register number 1 to 99
3 Num Select number of registers 1 to 99