Filter
Top Products
Section 2
2-81
Table 2.6 - AISI Cold Formed Steel Design Parameters
Parameter
Name
Default
Value
Description
STIFF
Member
length
Spacing in the longitudinal direction of shear
stiffeners for reinforced web elements. It is input in
the current units of length. See section AISI C3.2
TRACK
0
This parameter is used to control the level of detail
in which the design output is reported in the output
file. The allowable values are:
0 - Prints only the member number, section name,
ratio, and PASS/FAIL status.
1 - Prints the design summary in addition to that
printed by TRACK 1
2 - Prints member and material properties in addition
to that printed by TRACK 2.
TSA
1
Specifies whether bearing and intermediate
transverse stiffeners are present. If true, the program
uses the more liberal set of interaction equations in
AISI C3.3.2.
Values:
0 – Beams with un-reinforced webs
1 – Beams with transverse web stiffeners