Filter
Top Products
STAAD Commands and Input Instructions
Section 5
5-64
UNIT . . .
WIDE FLANGE
W14X30
8.85 13.84 .27 6.73 .385 291. 19.6 .38 0 0
W21X50
14.7 20.83 .38 6.53 .535 984 24.9 1.14 7.92 0
W14X109
32. 14.32 0.525 14.605 .86 1240 447 7.12 7.52 0
and the file TFILE2 will contain:
UNIT . . .
ANGLES
L25255
2.5 2.5 .3125 .489 0 0
L40404
4. 4. .25 .795 0 0
Notes
The User-Provided Steel Table(s) may be created and maintained
as separate file(s). The same files may be used for all models using
sections from these tables. These files should reside in the same
directory where the input file is located. On each file the first table
should contain a UNITS command.