Filter
Top Products
Section 5
5-207
multiplied by this lever arm to obtain the torsional moment
at that joint.
The following example shows the commands required to enable the
program to generate the lateral loads. Users may refer to Section
5.32.12 of the Technical Reference Manual for this information.
Example
LOAD 1 ( SEISMIC LOAD IN X DIRECTION )
IBC LOAD X 0.75
LOAD 2 ( SEISMIC LOAD IN Z DIRECTION )
IBC LOAD Z 0.75
The Examples manual contains examples illustrating load
generation involving IBC and UBC load types.