Filter
Top Products
Section 5
5-381
The PRINT STORY DRIFT command may be used to obtain a
print-out of the average lateral displacement of all joints at each
horizontal level along the height of the structure.
Example
PERFORM ANALYSIS
PRINT ELEMENT JOINT STRESS
PRINT ELEMENT STRESS AT 0.5 0.5 LIST 1 TO 10
PRINT SUPPORT REACTIONS
PRINT JOINT DISPLACEMENTS LIST 1 TO 50
PRINT MEMBER FORCES LIST 101 TO 124
Notes
1) The output generated by these commands is based on the
current unit system. The user may wish to verify the current
unit system and change it if necessary.
2) Results may be printed for all joints/members/elements or
based on a specified list.
Example for printing the CG
PRINT CG
PRINT CG _RAFTERBEAMS
PRINT CG _RIDGEBEAMS