Filter
Top Products
Section 5
5-63
Example
START USER TABLE
TABLE 1
UNIT . . .
WIDE FLANGE
W14X30
8.85 13.84 .27 6.73 .385 291. 19.6 .38 0 0
W21X50
14.7 20.83 .38 6.53 .535 984 24.9 1.14 7.92 0
W14X109
32. 14.32 .525 14.605 .86 1240 447 7.12 7.52 0
TABLE 2
UNIT . . .
ANGLES
L25255
2.5 2.5 0.3125 .489 0 0
L40404
4. 4. .25 .795 0 0
END
* These section-names must be provided in ascending order by
weight, since the member-selection process uses these tables
and the iteration starts from the top. The above example can
also be input as follows:
START USER TABLE
TABLE 1 TFILE1
TABLE 2 TFILE2
END
Where TFILE1 and TFILE2 are names of files which must be
created prior to running STAAD, and where the file TFILE1 will
contain the following: