Filter
Top Products
STAAD Commands and Input Instructions
Section 5
5-14
5.4 Input/Output Width Specification
Purpose
These commands may be used to specify the width(s) of the lines
of output file(s).
General format:
⎧INPUT ⎫
⎨ ⎬ WIDTH i
1
⎩
OUTPUT
⎭
For OUTPUT WIDTH,
i
1
= 72 or 118 depending on narrow or wide output.
Description
The user may specify the required input/output width, as required,
using this command. For INPUT width, 79 is always used. The
program can create output using two different output widths - 72
(default) and 118. The 72-character width may be used for display
on most CRTs and for printing on “portrait” wide paper. The 118-
character width may be used for printing on “landscape” wide
paper.
Notes
This is a customization facility that may be used to improve the
presentation quality of the run documents.