Filter
Top Products
STAAD Commands and Input Instructions
Section 5
5-78
5.20.4 Property Specification from User Provided
Table
Purpose
The following commands are used to specify section properties
from a previously created USER-PROVIDED STEEL TABLE.
General format:
member-list
UPTABLE I
1
section-name
UPTABLE stands for user-provided table
i
1
= table number as specified previously (1 to 99)
section-name = section name as specified in the table.
(Refer to Section 5.19)
See Section
1.7.3
Example
See Section 5.20.6