Filter
Top Products
Section 5
5-37
Specify the four nodes of any of the faces of the solid element
in a counter-clockwise direction as viewed from the outside of the
element and then go to the opposite face and specify the four
nodes of that face in the same direction used in specifying the
nodes of the first face. The opposite face must be behind the first
face, as defined by the right hand rule, i.e. the opposite (back)
face points to the first (front) face, which points to the viewer.
Use “REPEAT ALL 0” to start a set of solids that will be
repeated if you don’t want to repeat back to the last REPEAT ALL.
Example
ELEMENT INCIDENCE SOLID
1 1 5 6 2 21 25 26 22 TO 3
4 21 25 26 22 41 45 46 42 TO 6