Filter
Top Products
Chapter 9 Template Management
Vantage Access User’s Guide
122
9.3.1 Adding a New Parameter
Use the Add Parameter screen to insert a new parameter to a template. In the template Edit
screen, click Add to display the Add Parameter screen.
Figure 47 Provision Manager > Template > Management > Edit > Add Parameter
The following table describes the labels in this screen.
First This link is not available in the first screen.
Click First to return to the first screen.
Prev Click Prev to go to the previous screen.
Last This link is not available in the last screen.
Click Last to go to the last screen.
Go Enter a page number and click Go to display the entries in that page.
Back Click Back to return to the previous screen.
Add Click Add to insert a new parameter.
Delete Click Delete to remove the selected parameter.
Table 14 Provision Manager > Template > Management > Edit (continued)
LABEL DESCRIPTION
Table 15 Provision Manager > Template > Management > Edit > Add Parameter
LABEL DESCRIPTION
Template
Name
This read-only field displays the name of the template to which this parameter belongs.
Parameter
Name
Enter a descriptive name for a parameter. You can enter up to 250 characters
containing 0-9, a-z, A-Z, _ or - with no spaces.
OUI This field is available in a device-specific template.
Enter the OUI of the device. You can obtain the device OUI number in the Device List
screen.
Serial
Number
This field is available in a device-specific template.
Enter the unique serial number of the device. You can obtain the device serial number
in the Device List screen.
Type Select the value type for the parameter.
Value Specify the setting for the parameter.
Back Click Back to return to the previous screen without saving the settings.
Apply Click Apply to save the settings.
Reset Click Reset to start configuring this screen again.