Filter
Top Products
Chapter 23 STB Service
Vantage Access User’s Guide
429
Figure 404 TR-135: STBService: Components: IP: IGMP
The following table describes the fields in this screen. Refer to Section 11.2.4 on page 132 for
other field descriptions.
23.3.16 Front End Client Groups
You can view front end client groups in the ClientGroup screen.
Table 236 TR-135: STBService: Components: IP: IGMP
PARAMETER NAME VALUE
Enable This displays whether IGMP is enabled or disabled.
Status This displays the status of IGMP support.
MaximumNumberOfC
oncurrentGroups
This displays the maximum number of group memberships allowed
simultaneously.
MaximumNumberOfTr
ackedGroups
This displays the maximum number of groups for which
statistics will be tracked.
LoggingEnable This displays whether IGMP traffic logging is enabled.
DSCPMark This displays the DiffServ code point to be used for outgoing IGMP packets.
VLANIDMark This displays the VLAN ID to be used for outgoing IGMP packets.
EthernetPriorityMark This displays Ethernet priority code to be used for outgoing IGMP packets.
ClientVersion This displays the highest IGMP version supported by the IGMP Client.
ClientRobustness This displays how vulnerable the network is to lost packets.
ClientUnsolicitedRepo
rtInterval
This displays the number of seconds between repetitions of a host’s initial
report of membership in a group.
ClientGroupNumberOf
Entries
This displays the number of entries in the ClientGroup table.
ClientGroupStatsNum
berOfEntries
This displays the number of entries in the ClientGroupStats table.