Filter
Top Products
Chapter 15 WAN Device
Vantage Access User’s Guide
187
15.13.1 WAN IP Connection Details
You can configure and view basic IP settings for the WAN connection in the detailed
WANIPConnection screen.
1 Select a registered device in the Device List window and click InternetGatewayDevice
> WANDevice.
2 Click a number and WANConnectionDevice.
3 Click a number and WANIPConnection.
4 Click a number to display the screen as shown.
Figure 122 TR-069: WAN Device: WANIPConnection: Details
The following table describes the labels in this screen. Refer to Section 11.2.4 on page 132 for
other field descriptions.
Table 59 TR-069: WAN Device: WANIPConnection: Details
PARAMETER NAME VALUE
Enable This field displays 1 to indicate that this link is active; otherwise this field
displays 0.
ConnectionStatus This field displays the link status (Unconfigured, Connecting,
Connected, PendingDisconnect, Disconnecting, Disconnected).
PossibleConnectionType
s
This field displays the connection type(s) this link supports.
ConnectionType This field displays the connection type for this link.
Name This field displays a descriptive name (up to 256 characters) for this link.
Uptime This field displays the number of seconds the link has been up.