Filter
Top Products
Chapter 20 LAN Device
Vantage Access User’s Guide
320
BasicDataTransmit
Rates
This field displays the wireless transmission rate (Mbps) for broadcast, multicast
and unicast frames on the device.
Multiple transmission rates are separated by commas (,). For example, “1,2”
means the device is able to send at 1 Mbps or 2 Mbps.
OperationalDataTr
ansmitRates
This field displays the maximum transmission rate (in Mbps) allowed for unicast
frames on the device.
Multiple transmission rates are separated by commas (,). For example, if the
BasicDataTransmitRates field is “1,2” and this field is “1,2,5.5,11”, then the
device can transmit unicast frames at the maximum rates of 5.5 Mbps or 11
Mbps.
PossibleDataTrans
mitRates
This field displays the transmission rates for unicast frames WLAN clients are
allowed when connected to the device.
For example, if this field displays “1,2,5.5”. This means that the device allows a
wireless connection of up to 5.5 Mbps even though it is capable of connecting at
11 Mbps.
InsecureOOBAcce
ssEnabled
This field displays 1 to indicate that configuration changes are allowed to send
through insecure management methods other than the WAN CPE Management
Protocol.
0 disables this feature.
BeaconAdvertisem
entEnabled
This field displays 1 to indicate that the device is set to send beacons to advertise
its presence; otherwise, this field is 0.
RadioEnabled This field display 1 to indicate that the wireless transmission is allowed on the
device; otherwise, this field displays 0.
AutoRateFallBack
Enabled
This field displays 1 to indicate that the device is set to automatically reduce
wireless transmission rates due to noise or contention.
0 deactivates this feature.
LocationDescriptio
n
This field displays the location of the device for identification purposes.
RegulatoryDomain This field displays the name of the regulatory body in your geographical area.
The first two characters are the country code as defined in ISO/IEC 3166-1. For
the third character, “ “ means all environment, “I” means inside and “O” means
outside.
TotalPSKFailures This field is applicable for WPA and 802.11i authentication methods.
This field displays the number of times pre-shared key authentication has failed.
TotalIntegrityFailur
es
This field is applicable for WPA and 802.11i authentication methods.
This field displays the number of times MICHEAL integrity check has failed.
ChannelsInUse This field displays the channel number(s) that is currently used on the device for
wireless transmission.
DeviceOperationM
ode
This field displays the wireless operation mode for the device.
DistanceFromRoot This field displays the number of hops between this device and the wireless
bridge/repeater.
PeerBSSID This field displays the MAC address of the peer wireless bridge/repeater.
AuthenticationServ
iceMode
If user authentication is enabled, this field displays the location of the user
database the device is to check.
TotalBytesSent This field displays the number of transmitted bytes on this interface.
TotalBytesReceive
d
This field displays the number of received bytes on this interface.
Table 144 TR-098 Amendment 1: LAN Device: WLANConfiguration (continued)
PARAMETER
NAME
VALUE