ZyXEL Communications vantage access Food Warmer User Manual


 
Chapter 21 WAN Device
Vantage Access User’s Guide
337
The following table describes the labels in this screen. Refer to Section 11.2.4 on page 132 for
other field descriptions.
21.8 WAN Connection Device
For DSL connections, you can view the connection instances associated to an ATM VC in the
WANConnectionDevice screen.
Select a registered device in the Device List window and click Configuration >
InternetGatewayDevice > WANDevice. Click a number and WANConnectionDevice
to
display the screen as shown.
Figure 285 TR-098 Amendment 1: WAN Device: WANConnectionDevice
21.9 WAN Connection Device Details
You can view the number of connection instances associated to WAN connection device in the
detailed WANConnectionDevice screen.
1 Select a registered device in the Device List window and click Configuration >
InternetGatewayDevice > WANDevice.
2 Click a number and WANConnectionDevice.
Table 155 TR-098 Amendment 1: WAN Device: WANDSLDiagnostics
PARAMETER
NAME
VALUE
LoopDiagnost
icsState
This field displays the availability of the link diagnostic test result. Requested
indicates a test is to be initialized.
ACTPSDds This field displays the actual power spectral density for the downstream traffic.
ACTPSDus This field displays the actual power spectral density for the upstream traffic.
ACTATPds This field displays the actual aggregate transmitter power for the downstream traffic.
ACTATPus This field displays the actual aggregate transmitter power for the upstream traffic.
HLINSCds This field displays the linear representation scale for the downstream traffic.
HLINpsds This field displays the linear channel characteristics per subcarrier for the upstream
traffic.
QLNpsds This field displays the quiet line noise per subcarrier for the downstream traffic in
comma-separated list of numbers.
Maximum list of numbers is 256 for an ADSL/ADSL2 connection and 512 for an
ADSL2+ connection.
SNRpsds This field displays the Signal-to-Noise ratio per subcarrier for the downstream traffic.
BITSpsds This field displays the bit allocation per subcarrier for the downstream traffic.
GAINSpsds This field displays the gain allocation per subcarrier for the downstream traffic.