Filter
Top Products
Chapter 23 STB Service
Vantage Access User’s Guide
410
23.2.7 MPEG2 Part 2 Profile Levels
You can view and configure MPEG2 Part 2 profile levels in the ProfileLevel screen.
1 Select a registered device in the Device List window and click Data Model > Device >
Services > STBService.
2 Click a number and Capabilities.
3 Click Video Decoder > MPEG2Part2 > ProfileLevel to display the screen.
Figure 372 TR-135: STBService: Capabilities: MPEG2Part2 ProfileLevel
23.2.8 MPEG2 Part 2 Profile Level Settings
You can view and configure each MPEG2 Part 2 profile and level. Each is a combination of
profile and level.
1 Select a registered device in the Device List window and click Data Model > Device >
Services > STBService.
2 Click a number and Capabilities.
3 Click Video Decoder > MPEG2Part2 > ProfileLevel. Click a number to display the
screen.
Figure 373 TR-135: STBService: Capabilities: MPEG2Part2 ProfileLevel Settings
The following table describes the fields in this screen. Refer to Section 11.2.4 on page 132 for
other field descriptions.
Table 211 TR-135: STBService: Capabilities: MPEG2Part2 ProfileLevel Settings
PARAMETER NAME VALUE
Profile This displays the MPEG2 part 2 profile.
Level This displays the MPEG2 part 2 level.
MaximumDecodingCa
pability
This displays the maximum decoding capability for this video standard in
kilobits per second.