Filter
Top Products
Chapter 19 General Device Setup
Vantage Access User’s Guide
282
19.6 Manageable Device
Use the Manageable Device screen to see layer 3 forwarding settings on the device.
PeriodicInformTim
e
This field is applicable when in the PeriodicInformEnable field is 1.
This field displays the reference time and date the device is to initiate the
information updates. The time in the format yyyy-mm-ddThh:mm:ss.
ParameterKey This field displays the parameter that is changed from the most recent information
update.
ConnectionReque
stURL
This field displays the URL of the device to which Vantage Access sends a
connection request.
ConnectionReque
stUsername
This field displays the user name Vantage Access uses to access the device.
This is required if you want Vantage Access to initiate a connection and access the
device.
ConnectionReque
stPassword
This field displays the password associated with the user name above.
UpgradesManage
d
This field displays 1 to allow Vantage Access to upgrade firmware on the device.
This field displays 0 to indicate that remote firmware upgrade through Vantage
Access is disabled.
KickURL This field displays the URL on the LAN from which the device can initiate a Kick
request.
DownloadProgres
sURL
This field displays the URL of a website on the LAN to which a user’s web browser
is redirected to display the file transfer progress of the device.
UDPConnectionR
equestAddress
This field displays the URL of the device to which Vantage Access sends a UDP
connection request.
UDPConnectionR
equestAddressNo
tificationLimit
This field displays the minimum time, in seconds, between Active Notifications
resulting from changes to the UDPConnectionRequestAddress (if Active
Notification is enabled).
STUNEnable This displays whether STUN (Simple Traversal of User Datagram Protocol through
Network Address Translators (NATs)) is enabled or not.
STUNServerAddr
ess
This displays the STUN server’s IP address.
STUNServerPort This displays the port number of the STUN server.
STUNUsername This displays the STUN server username.
STUNPassword This displays the STUN server password associated with the STUNUsername.
STUNMaximumK
eepAlivePeriod
This displays the STUN server maximum keep-alive period.
STUNMinimumKe
epAlivePeriod
This displays the STUN server minimum keep-alive period.
NATDetected This displays whether NAT (Network Address Translation) is in operation.
ManageableDevic
eNumberOfEntrie
s
This displays the number of devices connected to this device that can be
managed by Vantage Access.
ManageableDevic
eNotificationLimit
This displays the maximum number of manageable devices after which a
notification is sent.
Table 119 TR-098 Amendment 1: ManagementServer (continued)
PARAMETER
NAME
VALUE