Filter
Top Products
Chapter 16 General Device Setup
Vantage Access User’s Guide
205
16.7 User Interface
Use the UserInterface screen to configure remote management settings to access the web
configurator on the device.
Click Provision > Data Model > InternetGatewayDevice > UserInterface to display the
screen as shown.
Figure 138 TR-098: UserInterface
The following table describes the labels in this screen. Refer to Section 11.2.4 on page 132 for
other field descriptions.
DaylightSavingsSt
art
This field is applicable if the DaylightSavingsUsed field is 1.
This field displays the starting date of the daylight savings time in the format 0000-
00-00T00:00:00.
DaylightSavingsE
nd
This field is applicable if the DaylightSavingsUsed field is 1.
This field displays the end date of the daylight savings time in the format 0000-00-
00T00:00:00.
Table 70 TR-098: Time (continued)
PARAMETER
NAME
VALUE
Table 71 TR-098: UserInterface
PARAMETER
NAME
VALUE
PasswordRequire
d
This field displays 1 if a password is required to log into the web configurator on
the device.
This field displays 0 if a password is not required.
PasswordUserSel
ectable
This field displays 1 if a user can specify a different password for Auto-
configuration on the device; otherwise it displays 0.