Filter
Top Products
Chapter 26 General Device Setup
Vantage Access User’s Guide
490
Figure 479 TR-106 Amendment 1: Device: Info
The following table describes the labels in this screen. Refer to Section 11.2.4 on page 132 for
other field descriptions.
Table 289 TR-106 Amendment 1: Device: Info
PARAMETER
NAME
VALUE
Manufacturer This is the name of the company that produced this device.
ManufacturerOUI This field displays the six-hexadecimal-digit OUI (Organization Unit Identifier) of
the company. The OUI is a unique number assigned by the IANA. Devices
produced by the same company have the same hard-wired OUI.
ModelName This field displays the device model name.
Description This field displays additional information about the device.
ProductClass This field identifies the product or class over which the SerialNumber parameter
is unique.
SerialNumber This field displays the device serial number.
HardwareVersion This field displays the hardware model name.
SoftwareVersion This field displays the firmware version number.
EnabledOptions This field displays the name of the options enabled on the device.
AdditionalHardwa
reVersion
This field displays the available information about the additional hardware version.
AdditionalSoftwar
eVersion
This field displays the available information about the additional software version.
ProvisioningCode The provisioning code is used by the service provider to identify specific
parameter settings for the device.
Enter the identifier of the DSL service provider or provisioning information. You
can enter up to 64 characters (use only A-Z, 0-9 and “.” with no spaces allowed).
DeviceStatus This field displays the current operational status of the device. The device’s status
may be "Up", "Initializing", "Error", or "Disabled".