Filter
Top Products
Chapter 18 WAN Device
Vantage Access User’s Guide
267
The following table describes the labels in this screen. Refer to Section 11.2.4 on page 132 for
other field descriptions.
18.14 WAN PPP Connection
Display the WANPPPConnection screen to view a PPP connection instance on the WAN
interface. Refer to Section 11.2.4 on page 132 for other field descriptions.
1 Select a registered device in the Device List window and click Configuration >
InternetGatewayDevice > WANDevice.
2 Click a number and WANConnectionDevice.
3 Click a number and WANPPPConnection to display the screen as shown.
Figure 210 TR-098: WAN Device: WANPPPConnection
18.14.1 WAN PPP Connection Details
Display the detailed WANPPPConnection screen to configure and view basic PPP settings
for Internet access on the WAN interface.
1 Select a registered device in the Device List window and click Configuration >
InternetGatewayDevice > WANDevice.
2 Click a number and WANConnectionDevice.
3 Click a number and WANPPPConnection.
4 Click a number to display the screen as shown.
Table 111 TR-098: WAN Device: WANIPConnection: Stats
PARAMETER
NAME
VALUE
EthernetBytesSent This field displays the total number of bytes sent through the WAN since the
device was last reset.
EthernetBytesRec
eived
This field displays the total number of bytes received on the WAN since the
device was last reset.
EthernetPacketsS
ent
This field displays the total number of packets sent through the WAN since the
device was last reset.
EthernetPacketsR
eceived
This field displays the total number of packets received on the WAN since the
device was last reset.