Filter
Top Products
Chapter 22 Voice Service
Vantage Access User’s Guide
389
The following table describes the fields in this screen. Refer to Section 11.2.4 on page 132 for
other field descriptions.
22.14.12 Voice Profile Ringer Pattern
Use the Pattern screen to view a list of ring patterns. Refer to Section 11.2.4 on page 132 for
other field descriptions.
1 Select a registered device in the Device List window and click Data Model > Device >
Services > VoiceService.
2 Click a number and VoiceProfile.
3 Click a number and Line.
4 Click a number and Ringer.
5 Click Pattern to display the screen.
Figure 350 TR-104: VoiceService: VoiceProfile: Ringer: Pattern
22.14.13 Voice Profile Ringer Pattern Setup
Use the detailed Pattern screen to configure ringer pattern settings.
1 Select a registered device in the Device List window and click Data Model > Device >
Services > VoiceService.
2 Click a number and VoiceProfile.
3 Click a number and Line.
4 Click a number and Ringer.
5 Click Pattern and a number to display the screen.
Table 194 TR-104: VoiceService: VoiceProfile: Ringer: Description: Details
PARAMETER NAME VALUE
EntryID This field displays the index number.
RingEnable This field displays whether the entry is activated or not.
RingName This field displays the name for this entry.
RingPattern This field displays the index number in the pattern table that starts the ring
pattern.
RingFile This field displays the name of the ring file downloaded to the device.