Chapter 38 Call Center
Vantage Access User’s Guide
574
38.1.1 Default Gateway Setting Example
Follow the steps below to configure a CPE method, Device.LAN.DefaultGateway , using a
call center account.
1 Enter the beginning charactors of a parameter name in the Parameter Name field. For
example, “Device.L”. The matching parameters appear in the list.
You can also enter a full parameter name or copy and paste a parameter name from the
Task Monitor section of this screen. Select the parameter you want to configure.
2 The CPE Method field appears. Select the method you want to configure, such as
SetParameterValues in this example.
3 Additional fields appear. These fields may vary depending on the CPE method you
selected. Configure them. For example, enter 192.168.1.254 to change the LAN default
gateway IP on the CPE device. Click Apply to apply the change.