Filter
Top Products
Chapter 15 WAN Device
Vantage Access User’s Guide
180
15.7 WAN DSL Diagnostics
You can view the DSL connection diagnostics data in the WANDSLDiagnostics screen.
Select a registered device in the Device List window and click InternetGatewayDevice >
WANDevice. Click a number and WANDSLDiagnostics
to display the screen as shown.
Figure 114 TR-069: WAN Device: WANDSLDiagnostics
The following table describes the labels in this screen. Refer to Section 11.2.4 on page 132 for
other field descriptions.
DestinationAddress This field shows the destination address of the connection. The address
displayed varies depending on the connection type.
This field displays VCI/VPI for a PVC connection.
This field displays an ATM connection name or ATM address for an SVC
connection.
LinkType This field displays the type of the link.
ConnectionType This field displays the name of the connection type.
Name This field displays the descriptive name for this connection.
Table 53 TR-069: WAN Device: WANDSLConnectionManagement: ConnectionService:
Setup (continued)
PARAMETER NAME VALUE
Table 54 TR-069: WAN Device: WANDSLDiagnostics
PARAMETER
NAME
VALUE
LoopDiagnost
icsState
This field displays the availability of the link diagnostic test result. Requested
indicates a test is to be initialized.
ACTPSDds This field displays the actual power spectral density for the downstream traffic.
ACTPSDus This field displays the actual power spectral density for the upstream traffic.
ACTATPds This field displays the actual aggregate transmitter power for the downstream traffic.
ACTATPus This field displays the actual aggregate transmitter power for the upstream traffic.
HLINSCds This field displays the linear representation scale for the downstream traffic.
HLINpsds This field displays the linear channel characteristics per subcarrier for the upstream
traffic.