Filter
Top Products
Chapter 18 WAN Device
Vantage Access User’s Guide
266
The following table describes the labels in this screen. Refer to Section 11.2.4 on page 132 for
other field descriptions.
18.13.4 WAN IP Connection Statistics
Display the Stats screen to view the statistics of all IP connections on the WAN interface.
1 Select a registered device in the Device List window and click Data Model >
InternetGatewayDevice > WANDevice.
2 Click a number and WANConnectionDevice.
3 Click a number and WANIPConnection.
4 Click a number and Stats to display the screen as shown.
Figure 209 TR-098: WAN Device: WANIPConnection: Stats
Table 110 TR-098: WAN Device: WANIPConnection: PortMapping: Details
PARAMETER NAME VALUE
PortMappingEnabled This field displays 1 to indicate that the port mapping entry on this link is
enabled; otherwise this field displays 0.
PortMappingLeaseDurati
on
This field displays the time (between 1 to 4294967295 seconds) the device
stores the port mapping entry. After this, the entry is removed from the port
mapping table.
0 means that a port mapping entry is static and cannot be removed from
the port mapping table.
RemoteHost This field displays the IP address of the remote host device.
If this field is blank, it indicates a wildcard which the device must support. In
this case, when a packet is sent to the external port on the WAN, the device
will forward the packet to the internal port.
ExternalPort This field displays a port number (between 0 and 4294967295) the device
listens on for NAT connection requests.
0 indicates a wildcard. This sets the device to forward a wildcard packet to
the internal port.
InternalPort This field displays a port number for the internal port (between 1 and
4294967295) to which the device forwards packets with wildcard.
PortMappingProtocol This field displays the protocol (UDP or TCP) used for port mapping.
InternalClient This field displays the IP address or domain name of a host on the LAN.
To allow UDP port mapping or multiple NAT clients to use the same port
number, use the broadcast address of 255.255.255.255 for the internal
client.
PortMappingDescription This field displays a descriptive name (up to 256 characters) to identify this
port mapping entry.