Filter
Top Products
Chapter 23 STB Service
Vantage Access User’s Guide
415
Figure 381 TR-135: STBService: Capabilities: SMPTE VC-1 ProfileLevel
23.2.17 SMPTE VC-1 Profile Level Settings
You can view and configure each SMPTE VC-1 profile and level. Each is a combination of
profile and level.
1 Select a registered device in the Device List window and click Data Model > Device >
Services > STBService.
2 Click a number and Capabilities.
3 Click Video Decoder > SMPTE VC-1 > ProfileLevel. Click a number to display the
screen.
Figure 382 TR-135: STBService: Capabilities: SMPTE VC-1 ProfileLevel Settings
The following table describes the fields in this screen. Refer to Section 11.2.4 on page 132 for
other field descriptions.
23.2.18 Audio Output Setup
You can view and configure audio output capabilities in the Audio Output screen. These may
include output formats, output connectors, and copy protection.
1 Select a registered device in the Device List window and click Data Model > Device >
Services > STBService.
2 Click a number and Capabilities.
3 Click Audio Output to display the screen.
Table 217 TR-135: STBService: Capabilities: SMPTE VC-1 ProfileLevel Settings
PARAMETER NAME VALUE
Profile This displays the SMPTE VC-1 profile.
Level This displays the SMPTE VC-1 level.
MaximumDecodingCa
pability
This displays the maximum decoding capability for this video standard in
kilobits per second.