Filter
Top Products
Chapter 26 General Device Setup
Vantage Access User’s Guide
492
The following table describes the labels in this screen. Refer to Section 11.2.4 on page 132 for
other field descriptions.
Table 290 TR-106 Amendment 1: ManagementServer
PARAMETER
NAME
VALUE
URL This field displays the address of the Vantage Access server to which the device
connects for remote management.
For example, “http://www.zyxel.com/TR106-a-1”.
UserName This field displays the user name the device uses to access Vantage Access.
Password This field displays the password (up to 256 alphanumeric characters) associated
with the user name above.
Note: You must configure the same access user name and
password on the device and the Vantage Access server.
PeriodicInformEn
able
This field displays true to indicate that the device is set to regularly send device
information updates to Vantage Access.
This field displays false to indicate that this feature is disabled. In this case, you
must then manually update device information changes.
PeriodicInformInte
rval
This field is applicable when the PeriodicInformEnable field is 1.
This field displays the time (in seconds) the device is to wait before sending device
request information updates to Vantage Access.
PeriodicInformTim
e
This field is applicable when in the PeriodicInformEnable field is 1.
This field displays the reference time and date the device is to initiate the
information updates. The time in the format yyyy-mm-ddThh:mm:ss.
ParameterKey This field displays the parameter that is changed from the most recent information
update.
ConnectionReque
stURL
This field displays the URL of the device to which Vantage Access sends a
connection request.
ConnectionReque
stUsername
This field displays the user name Vantage Access uses to access the device.
This is required if you want Vantage Access to initiate a connection and access the
device.
ConnectionReque
stPassword
This field displays the password associated with the user name above.
UpgradesManage
d
This field displays 1 to allow Vantage Access to upgrade firmware on the device.
This field displays 0 to indicate that remote firmware upgrade through Vantage
Access is disabled.
KickURL This field displays the URL on the LAN from which the device can initiate a Kick
request.
DownloadProgres
sURL
This field displays the URL of a web site on the LAN to which a user’s web
browser is redirected to display the file transfer progress of the device.
UDPConnectionR
equestAddress
This field displays the URL of the device to which Vantage Access sends a UDP
connection request.
UDPConnectionR
equestAddressNo
tificationLimit
This field displays the maximum number of times the UDP connection request is
made.
STUNEnable This displays whether STUN (Simple Traversal of User Datagram Protocol through
Network Address Translators (NATs)) is enabled or not.
STUNServerAddr
ess
This displays the STUN server’s IP address.
STUNServerPort This displays the port number of the STUN server.