Filter
Top Products
Chapter 22 Voice Service
Vantage Access User’s Guide
380
2 Click a number and VoiceProfile.
3 Click a number and Tone.
4 Click Pattern and a number to display the screen.
Figure 333 TR-104: VoiceService: VoiceProfile: Tone: Pattern: Details
The following table describes the fields in this screen. Refer to Section 11.2.4 on page 132 for
other field descriptions.
22.12 Voice Profile Button Map
Use the ButtonMap screen to view the number of button objects.
1 Select a registered device in the Device List window and click Data Model > Device >
Services > VoiceService.
2 Click a number and VoiceProfile.
3 Click a number and ButtonMap to display the screen.
Table 186 TR-104: VoiceService: VoiceProfile: Tone: Pattern: Details
PARAMETER NAME VALUE
EntryID This field displays the index number of a single phase in the tone pattern.
ToneOn This field displays whether or not the tone pattern is enabled during a phase.
Frequency1..4 This field displays the frequency of the tone component in hertz.
Power1..4 This field displays the tone power level in units of 0.1dBm0.
ModulationFrequency This field displays the modulation frequency in hertz.
ModulationPower This field displays the modulation power in units of 0.1dBm0.
Duration This field displays the time (in milliseconds) for this phase of the tone pattern.
NextEntryID This field displays the index number of the next phase of the tone pattern after
the duration of the current phase is completed.