Filter
Top Products
Chapter 19 General Device Setup
Vantage Access User’s Guide
284
Figure 223 TR-098 Amendment 1: Time
The following table describes the labels in this screen. Refer to Section 11.2.4 on page 132 for
other field descriptions.
19.8 User Interface
Use the UserInterface screen to configure remote management settings to access the web
configurator on the device.
Click Data Model > InternetGatewayDevice > UserInterface to display the screen as
shown.
Table 121 TR-098 Amendment 1: Time
PARAMETER
NAME
VALUE
NTPServer1 .. 5 This field displays the IP address or host name of the time server the device is to
use to update the system time. For example, “http://www.zyxel.com”.
CurrentLocalTime This field displays the current system time on the device.
LocalTimeZone This field displays the time offset from the UTC (Universal Time Coordinate). For
example, +08:00.
LocalTimeZoneNa
me
This field displays the name of the local time zone.
DaylightSavingsU
sed
This field displays 1 to indicate that daylight savings time is enabled on the device.
This field displays 0 if this feature is disabled.
DaylightSavingsSt
art
This field is applicable if the DaylightSavingsUsed field is 1.
This field displays the starting date of the daylight savings time in the format 0000-
00-00T00:00:00.
DaylightSavingsE
nd
This field is applicable if the DaylightSavingsUsed field is 1.
This field displays the end date of the daylight savings time in the format 0000-00-
00T00:00:00.