Filter
Top Products
Chapter 16 General Device Setup
Vantage Access User’s Guide
223
16.10.7 Queue Policer
Use the Policer screen to view the queue policy table list on the device. Refer to Section
11.2.4 on page 132 for other field descriptions.
Select a registered device in the Device List window and click Provision > Data Model >
InternetGatewayDevice > QueueManagement > Policer.
Figure 158 TR-098: QueueManagement: Policer
16.10.8 Queue Policer Details
Use the detailed Policer screen to view and configure the queue policy table entry on the
device.
Select a registered device in the Device List window and click Provision > Data Model >
InternetGatewayDevice > QueueManagement > Policer. Click a number to display the
screen.
Figure 159 TR-098: QueueManagement: Policer: Details
The following table describes the labels in this screen. Refer to Section 11.2.4 on page 132 for
other field descriptions.
Table 83 TR-098: QueueManagement: Policer: Details
LABEL DESCRIPTION
PolicerKey This field displays the index number of the policer table entry.
PolicerEnable This field displays whether the entry is activated or not.
PolicerStatus This field displays the current status of the entry.
CommittedRate This field displays the committed rate (in bits/sec) allowed for this entry.