Filter
Top Products
Chapter 21 WAN Device
Vantage Access User’s Guide
328
21.2 WAN Common Interface Configuration
You can view basic common connection status in the WANCommonInterfaceConfig screen.
Select a registered device in the Device List window and click Data Model >
InternetGatewayDevice > WANDevice. Click a number and
WANCommonInterfaceConfig to display the screen.
Figure 274 TR-098 Amendment 1: WAN Device: WANCommonInterfaceConfig
The following table describes the labels in this screen. Refer to Section 11.2.4 on page 132 for
other field descriptions.
Table 148 TR-098 Amendment 1: WAN Device: WANCommonInterfaceConfig
PARAMETER NAME VALUE
EnabledForInternet This field displays 1 to indicate that the WAN interface is enabled for
Internet access; otherwise, the field displays 0.
WANAccessType This field displays the type of connection for Internet access on the
WAN interface.
Layer1UpstreamMaxBitRate This field displays the maximum upstream transmission rate in bits
per second.
Layer1DownstreamMaxBitRate This field displays the maximum download transmission rate in bits
per second.
PhysicalLinkStatus This field displays the link status. Possible states are Up, Down,
Initializing and Unavailable.
WANAccessProvider This field displays the name of the ISP providing the Internet access
service.
TotalBytesSent This field displays the total number of bytes transmitted.
TotalBytesReceived This field displays the total number of bytes received.
TotalPacketsSent This field displays the total number of packets transmitted.
TotalPacketsReceived This field displays the total number of packets received.
MaximumActiveConnections This field displays the maximum number of connections allowed on
the device for Internet access.
NumberOfActiveConnections This field displays the number of active connections on the device for
Internet access.