Filter
Top Products
Chapter 11 Device Provisioning
Vantage Access User’s Guide
132
11.2.3.2 Table Pop-up Screen
If the text is too long to fit into a table column, Vantage Access displays the text as a link.
Click on the link to display a pop-up screen that shows the text in full. The following shows an
example.
Figure 57 Table Pop-up Screen
11.2.4 Configuring CPE Methods
CPE (Customer Premises Equipment) methods are functions the managed devices support to
modify or send back parameter information. Only the Vantage Access server is allowed to
send requests to the devices to execute these functions. The Vantage Access server can request
information from or configure settings on the devices.
To configure CPE method settings for all the parameters in a Data Model screen, click the
modify icon ( ) in the right-hand corner of the screen.
To configure the CPE method settings for a parameter, click the modify icon ( or ) next
to the selected parameter in any Single Device screen. Fields in this screen vary depending on
the option you select in the CPE Methods field.
The following shows a screen example.
Figure 58 Provision > CPE Methods