Filter
Top Products
Chapter 24 General Device Setup
Vantage Access User’s Guide
476
24.5 Management Server
Use the Management Server screen to configure settings on the device to connect to the
Vantage Access server.
Click InternetGatewayDevice > ManagementServer.
Figure 467 TR-106: ManagementServer
The following table describes the labels in this screen. Refer to Section 11.2.4 on page 132 for
other field descriptions.
FirstUseDate This field displays the time and date the device first established a network
connection.
DeviceLog Enter additional information for this device.
Table 280 TR-106: Device: Info (continued)
PARAMETER
NAME
VALUE
Table 281 TR-106: ManagementServer
PARAMETER
NAME
VALUE
URL This field displays the address of the Vantage Access server to which the device
connects for remote management.
For example, “http://www.zyxel.com/TR069”.
UserName This field displays the user name the device uses to access Vantage Access.
Password This field displays the password (up to 256 alphanumeric characters) associated
with the user name above.
Note: You must configure the same access user name and
password on the device and the Vantage Access server.
PeriodicInformEn
able
This field displays true to indicate that the device is set to regularly send device
information updates to Vantage Access.
This field displays false to indicate that this feature is disabled. In this case, you
must then manually update device information changes.