Filter
Top Products
Chapter 23 STB Service
Vantage Access User’s Guide
420
23.3.1 Front End
You can view and configure front end settings.
1 Select a registered device in the Device List window and click Data Model > Device >
Services > STBService.
2 Click a number and Components.
3 Click FrontEnd to display the screen.
Figure 390 TR-135: STBService: Components: FrontEnd
23.3.2 Front End Settings
You can view and configure front end settings for a device in the FrontEnd screen.
1 Select a registered device in the Device List window and click Data Model > Device >
Services > STBService.
2 Click a number and Components.
3 Click FrontEnd and a number to display the screen.
Figure 391 TR-135: STBService: Components: Device FrontEnd
The following table describes the fields in this screen. Refer to Section 11.2.4 on page 132 for
other field descriptions.
Table 225 TR-135: STBService: Components: Device FrontEnd
PARAMETER NAME VALUE
Enable This displays whether the front end is active or inactive.
Status This displays the status of the front end.
Name This is the name associated with this front end.
Type This displays the type of the front end.