ZyXEL Communications vantage access Food Warmer User Manual


 
Chapter 19 General Device Setup
Vantage Access User’s Guide
293
The following table describes the labels in this screen. Refer to Section 11.2.4 on page 132 for
other field descriptions.
19.10.7 Available Interface Table
Use the AvailableInterface screen to view the interface table list on the device. Refer to
Section 11.2.4 on page 132 for other field descriptions.
Select a registered device in the Device List window and click Provision > Data Model > >
InternetGatewayDevice > Layer2Bridging > AvailableInterface.
Figure 235 TR-098 Amendment 1: Layer2Bridging: AvailableInterface
19.10.8 Available Interface Table Details
Use the detailed AvailableInterface screen to view and configure the interface table entry on
the device.
Select a registered device in the Device List window and click Provision > Data Model >
InternetGatewayDevice > Layer2Bridging > AvailableInterface. Click a number to display
the screen.
Table 128 TR-098 Amendment 1: Layer2Bridging: Marking: Details
LABEL DESCRIPTION
MarkingKey This field displays the index number of the marking table entry.
MarkingEnable This field displays whether the marking table entry is activated or not.
MarkingStatus This field displays the status of the marking table entry.
MarkingBridgeRefer
ence
This field displays the index number of the bridge table entry associated with
this marking table entry.
MarkingInterface This field displays the name of the interface to which the device applies this
marking table entry.
VLANIDUntag This field displays whether the device removes the VLAN tag from outgoing
packets on the interface.
VLANIDMark This field displays the VLAN ID of the outgoing packets to which this marking
table entry is to apply.
EthernetPriorityMark This field displays the Ethernet priority level to add to incoming packets on the
interface.
-1 means that the device does not change the priority level assigned by the
classifier.
EthernetPriorityOver
ride
This field displays whether the priority level marking is to apply to all packets on
the interface.