Filter
Top Products
Chapter 22 Voice Service
Vantage Access User’s Guide
382
The following table describes the fields in this screen. Refer to Section 11.2.4 on page 132 for
other field descriptions.
22.13 Voice Profile FaxT38
Use the FaxT38 screen to configure fax T38 relay settings.
1 Select a registered device in the Device List window and click Data Model > Device >
Services > VoiceService.
2 Click a number and VoiceProfile.
3 Click a number and FaxT38 to display the screen.
Figure 337 TR-104: VoiceService: VoiceProfile: FaxT38
The following table describes the fields in this screen. Refer to Section 11.2.4 on page 132 for
other field descriptions.
Table 187 TR-104: VoiceService: VoiceProfile: ButtonMap: Button: Details
PARAMETER NAME VALUE
ButtonName This field displays the name of the button.
FacilityAction This field displays the name of the optional facility action.
FacilityActionArgumen
t
This field displays the argument for the optional facility action.
QuickDialNumber This field displays the quick dial number.
ButtonMessage This field displays the text a user sees on the screen when the button is
pressed.
UserAccess This field displays whether the user is allowed to change the button settings.
Table 188 TR-104: VoiceService: VoiceProfile: FaxT38
PARAMETER NAME VALUE
Enable This field displays whether T38 is enabled or not.
BitRate This field displays the maximum bit rate for fax transmission.
HighSpeedPacketRat
e
This field displays the rate at which high speed data will be sent.
HighSpeedRedundan
cy
This field displays the packet-level redundancy for high speed transmission.
LowSpeedRedundanc
y
This field displays the packet-level redundancy for low speed transmission.
TCFMethod This field displays the method used to send data through the network.