Filter
Top Products
Chapter 22 Voice Service
Vantage Access User’s Guide
371
22.8 H323
Use the H323 screen to view and configure H.323 call signal settings for the profile.
1 Select a registered device in the Device List window and click Data Model > Device >
Services > VoiceService.
2 Click a number and VoiceProfile.
3 Click a number and H323.
Figure 319 TR-104: VoiceService: VoiceProfile: H323
The following table describes the fields in this screen. Refer to Section 11.2.4 on page 132 for
other field descriptions.
EthernetPriorityMark This field displays the IEEE 802.p priority level the device adds to outgoing
MGCP signalling packets.
AllowPiggybackEvents This field displays whether piggy back event is allowed to the MGCP call
agent.
SendRSIPImmediately This field displays whether the device is to send RSIP immediately after
restart.
Table 175 TR-104: VoiceService: VoiceProfile: MGCP (continued)
PARAMETER NAME VALUE
Table 176 TR-104: VoiceService: VoiceProfile: H.323
PARAMETER NAME VALUE
Gatekeeper This field displays the host name of the IP address of the H.323 Gatekeeper.
GatekeeperPort This field displays the destination port number to use to connect to the H.323
Gatekeeper.
GatekeeperID This field displays the ID number of the H.323 Gatekeeper.
TimeToLive This field displays the time to live (TTL) in milliseconds when registering to an
H.323 Gatekeeper.
H235Authentication This field displays whether H.235 security is enabled.
AuthPassword This field displays the password for use with H.235 security.
SendersID This field displays the device ID for use with H.235 security.
DSCPMark This field displays the DiffServ Code Point the device adds to outgoing H.323
signalling packets.