Filter
Top Products
Chapter 17 LAN Device
Vantage Access User’s Guide
239
Channel This field displays the wireless channel number (0 to 255) to use for transmission.
SSID This field displays the name (up to 32 characters) to identify the wireless network.
BeaconType This field displays the WLAN security mode for wireless transmission.
Select None to disable wireless security.
MACAddressContr
olEnabled
This field displays 1 to indicate that traffic with the specified MAC addresses is
allowed on this port. You can specify the MAC addresses in the
LANHostConfigManagement screen (refer to Section 17.2 on page 230).
0 means the MAC address control feature is disabled. All traffic is allowed
through the USB interface on the LAN.
Standard This field displays the wireless standard in which the device is currently
operating.
WEPKeyIndex This field displays the index number (1 - 4) of the WEP key the device is to use for
data encryption.
KeyPassphrase This field displays the passphrase the device uses to generate the WEP keys.
WEPEncryptionLe
vel
This field displays the wireless encryption level supported on the device.
BasicEncryptionMo
des
This field is applicable when you select a basic security option for the
BeaconType field.
WEPEncryption means the device is set to use basic WEP encryption for
wireless transmission.
None means WEP encryption is disabled. In this case, traffic sent through the
wireless network is not secure.
BasicAuthenticatio
nMode
This field is applicable when you select a basic security option in the
BeaconType field.
EAPAuthentication enables user authentication before wireless connection is
allowed for the WLAN clients.
None deactivates this feature. In this case, your wireless network may be
accessible by anyone.
WPAEncryptionMo
des
This field is applicable when you select a WPA security option in the BeaconType
field.
This field displays the encryption method to secure traffic over the wireless
network.
WPAAuthentication
Mode
This field is applicable when you select a WPA security option in the BeaconType
field.
This field displays the authentication method to control access to your wireless
network.
IEEE11iEncryption
Modes
This field is applicable when you select an 11i security option in the BeaconType
field.
This field displays the encryption method to secure traffic over the wireless
network.
IEEE11iAuthenticat
ionMode
This field is applicable when you select an 11i security option in the BeaconType
field.
This field displays the authentication method to control access to your wireless
network.
PossibleChannels This field displays wireless channels available for your device as defined by the
regulatory body.
Table 93 TR-098: LAN Device: WLANConfiguration (continued)
PARAMETER
NAME
VALUE