Filter
Top Products
Chapter 23 STB Service
Vantage Access User’s Guide
414
The following table describes the fields in this screen. Refer to Section 11.2.4 on page 132 for
other field descriptions.
23.2.15 SMPTEVC1 Setup
You can view and configure SMPTE (Society of Motion Picture and Television Engineers)
VC-1settings in the SMPTEVC1 screen. This screen displays the set of supported SMPTE
VC-1 profiles. It also displays the set of audio standards supported when SMPTE VC-1 is
used.
1 Select a registered device in the Device List window and click Data Model > Device >
Services > STBService.
2 Click a number and Capabilities.
3 Click Video Decoder > SMPTEVC1 to display the screen.
Figure 380 TR-135: STBService: Capabilities: SMPTE VC-1
The following table describes the fields in this screen. Refer to Section 11.2.4 on page 132 for
other field descriptions.
23.2.16 SMPTE VC-1 Profile Levels
You can view and configure SMPTE VC-1 Profile Levels in the ProfileLevel screen.
1 Select a registered device in the Device List window and click Data Model > Device >
Services > STBService.
2 Click a number and Capabilities.
3 Click Video Decoder > SMPTEVC1 > ProfileLevel to display the screen.
Table 215 TR-135: STBService: Capabilities: MPEG4Part10 ProfileLevel Settings
PARAMETER NAME VALUE
Profile This displays the MPEG4 part 10 profile.
Level This displays the MPEG4 part 10 level.
MaximumDecodingCa
pability
This displays the maximum decoding capability for this video standard in
kilobits per second.
Table 216 TR-135: STBService: Capabilities: SMPTE VC-1
PARAMETER NAME VALUE
AudioStandards This displays the SMPTE VC-1 audio standards supported by the STB.
ProfileLevelNumberOf
Entries
This displays the number of profile levels.