Filter
Top Products
Chapter 22 Voice Service
Vantage Access User’s Guide
376
22.10.2 Voice Profile Prefix Information Setup
Use the detailed PrefixInfo screen to view the list of prefix information entries for the voice
profile.
1 Select a registered device in the Device List window and click Data Model > Device >
Services > VoiceService.
2 Click a number and VoiceProfile.
3 Click a number and NumberingPlan.
4 Click PrefixInfo and a number to display the screen.
Figure 326 TR-104: VoiceService: VoiceProfile: PrefixInfo: Details
The following table describes the fields in this screen. Refer to Section 11.2.4 on page 132 for
other field descriptions.
22.11 Voice Profile Tone Setup
Use the Tone screen to view and configure the tones and announcements generated by the
device.
Table 182 TR-104: VoiceService: VoiceProfile: PrefixInfo: Details
PARAMETER NAME VALUE
PrefixRange This field displays the range of prefixes
PrefixMinNumberOfDi
gits
This field displays the minimum digits allowed for the prefix range. Once the
inter-digit timer and the minimum input digit is reached, an out-going request
is initiated.
PrefixMaxNumberOfD
igits
This field displays the maximum digits allowed for the prefix range. Once the
inter-digit timer and the maximum input digit is reached, an out-going request
is initiated.
NumberOfDigitsToRe
move
This field displays the number of digits to remove from the position specified in
the internal digit buffer.
PosOfDigitsToRemov
e
This field displays the position of the digits in the internal buffer to remove.
DialTone This field displays the name of the dial tone to display when a user dials the
same prefix number as specified.
FacilityAction This field displays the name of the facility action the device performs.
FacilityActionArgumen
t
This field displays the arguments used by the facility action above.