Filter
Top Products
Chapter 21 WAN Device
Vantage Access User’s Guide
341
21.11 WAN Ethernet Link Configuration
The WANEthernetLinkConfig screen displays the Ethernet link status (Up, Down or
Unavailable) in the EthernetLinkStatus field. Refer to Section 11.2.4 on page 132 for other
field descriptions.
1 Select a registered device in the Device List window and click Data Model >
InternetGatewayDevice > WANDevice.
2 Click a number and WANConnectionDevice.
3 Click a number and WANEthernetLinkConfig to display the screen as shown.
Figure 289 TR-098 Amendment 1: WAN Device: WANEthernetLinkConfig
21.12 WAN POTS Link Configuration
You can view the WAN POTS connection status in the WANPOTSLinkConfig screen. The
POST connection is used for dialing to the ISP for Internet access.
1 Select a registered device in the Device List window and click Data Model >
InternetGatewayDevice > WANDevice.
2 Click a number and WANConnectionDevice.
3 Click a number and WANPOTSLinkConfig to display the screen as shown.
MinimumResponseTime This field displays the minimum response time (in milliseconds) of the ping
that received a successful response in the most recent ping test.
If there is no successful response from the ping test, this field displays zero.
MaximumResponseTime This field displays the maximum response time (in milliseconds) of the ping
that received a successful response in the most recent ping test.
If there is no successful response from the ping test, this field displays zero.
Table 158 TR-098 Amendment 1: WAN Device: WANATMF5LoopbackDiagnostics
PARAMETER NAME VALUE