Filter
Top Products
Chapter 16 General Device Setup
Vantage Access User’s Guide
226
Figure 162 TR-098: LANConfigSecurity
16.12 IP Ping Diagnostics
Use the IPPingDiagnostics screen to configure the ping test settings on a device.
Select a registered device in the Device List window and click Provision > Data Model >
InternetGatewayDevice > IPPingDiagnostics.
Figure 163 TR-098: IPPingDiagnostics
The following table describes the labels in this screen. Refer to Section 11.2.4 on page 132 for
other field descriptions.
Table 85 TR-098: IPPingDiagnostics
LABEL DESCRIPTION
DiagnosticsState This field displays the ping test result.
Interface This field displays the hierarchical name of the interface for ping diagnostics.
For example,
“InternetGatewayDevice.WANDevice.1.WANConnectionDevice.1.WANPPPCo
nnection.1”.
You can enter up to 256 characters for the interface name.
Host This field displays the IP address or domain name of the host the device is to
ping to test the connection.
NumberOfRepetition
s
This field displays the number of ping test before displaying the result.
Timeout This field displays the timeout (in milli-seconds) for a ping test.
DataBlockSize This field displays the size of the packet to send for each ping test.
DSCP This field displays the DiffServ Code Point (DSCP) to use for the test packets.
The default is 0.