Filter
Top Products
Chapter 19 General Device Setup
Vantage Access User’s Guide
291
The following table describes the labels in this screen. Refer to Section 11.2.4 on page 132 for
other field descriptions.
Table 127 TR-098 Amendment 1: Layer2Bridging: Filter: Details
LABEL DESCRIPTION
FilterKey This field displays the index number of the filter table entry.
FilterEnable This field displays whether the entry is enabled.
FilterStatus This field displays the status of the entry.
FilterBridgeReferenc
e
This field displays the index number of the bridge table entry associated with
this filter table entry.
ExclusivityOrder This field displays whether the device is to match the filter table exclusively or
non-exclusively.
FilterInterface This field displays the name of the interface to which this filter table entry is
applied.
VLANIDFilter This field displays the VLAN ID of the packets the device is to filter on the
specified interface.
AdmitOnlyVLANTag
ged
This field displays whether the device is to allow tagged-only packets.
EthertypeFilterList This field displays the Ethernet type(s) for the filter list. Multiple entries are
separated by commas.
EthertypeFilterExclu
de
This field displays whether the filter is to allow packets with the Ethernet type
not specified.
SourceMACAddress
FilterList
This field displays the list of source MAC address(es) to filter. Multiple entries
are separated by commas.
SourceMACAddress
FilterExclude
This field displays whether the filter is to allow packets with the source MAC
address(es) not specified.
DestMACAddressFilt
erList
This field displays the list of destination MAC address(es) to filter. Multiple
entries are separated by commas.
DestMACAddressFilt
erExclude
This field displays whether the filter is to allow packets with the destination MAC
address(es) not specified.
SourceMACFromVe
ndorClassIDFilter
This field displays the list of device vendor ID (obtained through DHCP) to
which source MAC address filter is applied. Multiple entries are separated by
commas.
SourceMACFromVe
ndorClassIDFilterEx
clude
This field displays whether the filter is to allow packets with the vendor ID not
specified for the source MAC.
DestMACFromVend
orClassIDFilter
This field displays the list of device vendor ID (obtained through DHCP) to
which destination MAC address filter is applied. Multiple entries are separated
by commas.
DestMACFromVend
orClassIDFilterExclu
de
This field displays whether the filter is to allow packets with the vendor ID not
specified for the destination MAC.
SourceMACFromCli
entIDFilter
This field displays the list of DHCP client ID (option61, RFC2132) to which
source MAC address filter is applied. Multiple entries are separated by
commas.
SourceMACFromCli
entIDFilterExclude
This field displays whether the filter is to allow packets with the client ID not
specified for the source MAC.
DestMACFromClient
IDFilter
This field displays the list of DHCP client ID (option61, RFC2132) to which
destination MAC address filter is applied. Multiple entries are separated by
commas.