Filter
Top Products
Chapter 27 LAN
Vantage Access User’s Guide
501
The following table describes the labels in this screen. Refer to Section 11.2.4 on page 132 for
other field descriptions.
27.5 Traceroute Diagnostics
Use the TraceRouteDiagnostics screen to view or configure traceroute test settings.
Select a registered device in the Device List window and click Device > LAN. Click
TraceRouteDiagnostics.
Figure 490 TR-106 Amendment 1: LAN: TraceRouteDiagnostics
Table 298 TR-106 Amendment 1: LAN: DHCPOption: Details
PARAMETER
NAME
VALUE
DiagnosticsState This field displays the availability of the diagnostics result.
Host This field displays the name or the IP address of the host device to ping.
NumberOfRepetiti
ons
This field displays the number of ping tests to perform before reporting the test
result.
Timeout This field displays the timeout (in milliseconds) for a ping test.
DataBlockSize This field displays the size of the data block (in bytes) to send for each traceroute.
DSCP This field displays the DiffServ Code Point (DSCP) value for the ping packets to
send.
SuccessCount This field displays the number of successful ping tests.
FailureCount This field displays the number of unsuccessful ping tests.
AverageRespons
eTime
This field displays the average response time (in milliseconds) of all ping tests.
MinimumRespons
eTime
This field displays the minimum response time (in milliseconds) of all ping tests.
MaximumRespon
seTime
This field displays the maximum response time (in milliseconds) of all ping tests.